open range construction

Deck Contractor - Sherman, TX

Project Gallery

A table showing the projects done by the pro

Photo

Project

Date

Description

Cost

Home

2 in Locust

Jul 2018

Built 2 decks on each side of this Lake house for a Dallas client. first one they wanted 4x4 steel posts for main support on corners and underneath. Wanted it all made of 2x6x20' treated. Took 4 days. On the second deck it was an extension of the existing and made of all 2x6x16' treated.

$4k

Pottsboro, TX

Cedar Fence

May 2018

Client wanted a 4' fence with one 4' gate and one 10' horse gate/river gate. All cedar was ripped from a saw mill and still had curves in each board. By using smaller boards I covered up the gaps between each board. Client is very Happy.

$2k

Pottsboro, TX

Enclosed Porch add-on

Feb 2018

Wanted to ad an enclosed patio porch. was done by Sherman Code. Concrete piers were put in at 24 inchs deep by 24 inchs wide. Over kill for this small project but that is Shermans code. I have done 4 other projects for this person and they have always been happy.

$4k

Sherman, TX

Front Porch with Roof and a Back Porch as well

Jul 2017

Client wanted a 80 ft by 12 ft porch with a Metal roof and part was shingles, also wanted lattice in front. Back porch is much smaller 20'x12' same set up as front porch but smart siding was used to cover skirting. We also put up a Horse fence to keep the little doggies in. Basic materials used on both decks was All treated lumber with R-Panel roofing.

$5k

Bonham, TX

Lake deck

May 2017

Back yard deck with a Cedar back door cover. all materials used was 2x6x20' treated lumber. the cover was all cedar with shingles. Don't recall actual price for all materials.

$5k

Bonham, TX

Wrap around Venue Deck

Feb 2017

Took out existing deck and replaced with a brand new one. Two sides stayed at 6' wide and the other 2 sides were extended out too 14' wide. 3 sets of steps and 1 loading dock area. Has rails on 3 sides and lattice on 2, the back and West side has chicken wire for underpending. Also built a small storage shed on South side. Materials cost was around 10 grand. this project took appx. 3 months to build. after the deck was finished i moved inside to lay 700 sq ft of 18 inch tile in the kitchen area and 1602 sq ft of Commerical grade linolium hardwood flooring.Client had all the materials for the flooring so i don;t know pricing on that part.

$7k

Whitewright, TX

Carpenter Road

Jul 2016

This was a really fun job, had 2 puppies helping me and keeping a watchful eye out. Anyway just a normal flat deck the length of the mobile home. Wanted a ramp, rails and one step. Also installed a 4' chain link fence with one gate.

$4k

Leonard, TX

Boat slip Entertainment Center

Mar 2016

Built a kitchen and a Entertainment center on 2 boat slips out at Tangle Wood. Built a closet, space for a refrigerator, small sink and grille as well. The Bar was designed for storage underneath and for a Keg. Had a entertainment cabinet for a 55 inch flat screen. All materials were rough cedar on outside and it was stained as well. basic 2x4 frame underneath with shelves.

$6k

Pottsboro, TX

Lake Texoma at the VFW

Jun 2009

This project was the most fun i ever had. My client and his wife took off for Paris France and left me with 4600.00 to build this deck for them. half was for materials and it took about a month and half. Had too build and pour 5 concrete piers on a slope, that was the hardest part, rest was all down hill. all materials were treated lumber.

$5k

Pottsboro, TX