The Next Project Company

Flooring Contractor - Fayetteville, NC

5.0

12 reviews

5.0

12 reviews

Project Gallery

A table showing the projects done by the pro

Photo

Project

Date

Description

Cost

Home

Pre-finished engineered wood floor refinishing

Jul 2015

This is a more difficult refinish. There's only a thin layer of veneer so you need a company that can sand through the finish and stain, but not past the wood veneer and into the plywood. This house had water damage from a leaking faucet hose and they couldn't afford to tear up the 352sf floors and install new floors. This was a perfect option instead of new floors.

$1k

Cameron, NC

Handscraped look Wood Laminate

Jul 2015

This was for around 600sf of flooring. We removed the quarter round, and the existing glue down pre-engineered wood flooring that had water damage. We installed a 5" 12mm wood laminate that has a handscraped look. This is by far the best looking laminate we've installed before.

$4k

Cameron, NC

Hardwood Refinish in Haymount

Jul 2015

We removed around 800sf of carpet and tack strips, removed the existing shoe mold, sanded down all of the hardwood oak floors underneath, stained to match existing floors in home, applied 3 coats of finish, and reinstalled the quarterround. On this particular project we also had to fill in some wood in one of the closets that was an add on from an adjacent room, and we stained and finished wood registers.

$3k

Fayetteville, NC

Wood Laminate

Jun 2015

Removed carpet in 2 rooms and install wood laminate and matching shoe mold

$1k

Sanford, NC

Luxury Vinyl Tile

Jun 2015

We removed carpet throughout house and installed LVT continuously throughout the house and installed quarter round

$2k

Cameron, NC

New Tile in Landry Room, Bathroom, and Master Bath

Feb 2015

This was all high end tile. In the laundry room we installed a slate looking tile on a brick pattern, a 13x13 in the shared bathroom on a square pattern, and a 16x16 tile on a diamond pattern in the master.

$5k

Fayetteville, NC

New Oak Treads and Risers Custom Stained to Match Existing Floor

Jan 2015

We removed the existing carpet from the staircase. The way the staircase was built had the stair trim scribed over the existing treads and risers. The solution was new risers but tread caps. The landing was 2" hardwood oak flooring. We stained and finished the staircase to match the existing pre-engineered hardwood flooring.

$4k

Fayetteville, NC

Kitchen and Laundry Tile

Dec 2014

Removed sheet vinyl from the kitchen and laundry room and installed 12x12 ceramic tile on a brick pattern

$850

Raeford, NC

Custom Kitchen Backsplash

Apr 2009

We cut and installed this backsplash piece by piece. Fully custom which means this customer received a product that no one else will ever have.

$3k

Frisco, TX