COST CALCULATOR

How Much Does It Cost To Power Wash a House?

Typical range: $148-$182

Find out how much your project will cost

How much to power wash a house?

For your project in zip code 43215 with these options, the cost to power wash house starts at $0.35-$0.44 per square foot. Your actual price will depend on job size, conditions, finish options you choose.

Power washing is one of the easiest ways to revive your curb appeal and make your home look new. From mold and mildew to dirt and debris, your home’s exterior can go from pristine to unsightly in no time. Naturally, elements, litter from heavy storms, remnants from landscaping, and more stick to your exterior, lowering its luster. But how much does power washing a house cost? The average cost to pressure wash a house can vary widely, depending on many factors. Read this comprehensive guide to discover how much it costs to power wash a house and start planning for a clean and beautiful home in no time.

Cost Calculator
Calculations are dependent on where you live
Square Feet

Standard ServicesQuantityLowHigh
What you can expect
Range per square foot:$0.35$0.44
Range for this type of project:$148$182
Estimate: $165
House Exterior Washing Labor, Basic
2
hours
$73$89
arrow_drop_down
Labor cost, under typical conditions, for complete project. Surface will be swept clear of solid dirt and debris, and cleaner applied with light brushing. Surface will be thoroughly power-washed and rinsed.
House Exterior Washing Job Supplies
445
square feet
$28$32
arrow_drop_down
Requisite supplies for the job, including masking tape and paper, materials for surface repair, solvents, and cleanup supplies.
House Exterior Washing Equipment Allowance
1
job
$46$61
arrow_drop_down
Daily rental of specialty equipment for maximum quality and efficiency. These include 3,000-plus PSI, 4 GPM, gasoline-fueled power washer. Consumable equipment elements not included.
Standard services
House Exterior Washing Labor, Basic
$73 -$89
arrow_drop_down
2
hours
Labor cost, under typical conditions, for complete project. Surface will be swept clear of solid dirt and debris, and cleaner applied with light brushing. Surface will be thoroughly power-washed and rinsed.
House Exterior Washing Job Supplies
$28 -$32
arrow_drop_down
445
square feet
Requisite supplies for the job, including masking tape and paper, materials for surface repair, solvents, and cleanup supplies.
House Exterior Washing Equipment Allowance
$46 -$61
arrow_drop_down
1
job
Daily rental of specialty equipment for maximum quality and efficiency. These include 3,000-plus PSI, 4 GPM, gasoline-fueled power washer. Consumable equipment elements not included.
Optional Services
What you can expect
Range per square foot:
$0 - $0
Range for this type of project:
$148 - $182
Estimate:
$165
Cost Comparison
YOUR ESTIMATE
$165

NATIONAL AVERAGE RANGE
$153 -$189
YOUR ESTIMATE

Power Wash House: national average cost

The national average materials cost to power wash house is $0.07 per square foot, with a range between $0.07 to $0.08. The total price for labor and materials per square foot is $0.38, coming in between $0.34 to $0.42. A typical 500 square foot project costs $191.53, with a range of $171.84 to $211.22. Your actual price will depend on your location, job size, conditions and finish options you choose.
cost to power wash house
National Avg. Materials Cost per square foot$0.07
National Avg. Cost (labor and materials) for 500 square foot$191.53
National Cost Range (labor and materials) for 500 square foot$171.84 - $211.22

Cost to power wash house

While the cost to power wash a house can fluctuate from coast to coast, a small home will typically cost around $100 to power wash, while larger homes can run closer to $380 or more. The area you’re power washing also affects the price. For instance, if you’re looking to have your driveways power washed, it averages between $50 to $200. For a deck or patio, you can expect to pay between $250 to $500. A good rule of thumb when budgeting is to plan to spend about $2 per square foot to power wash a deck, driveway, or home’s exterior. Keep in mind rates can vary depending on the season and the demand. Prices can climb in warmer months when most homeowners are working on their home’s exterior and landscaping. With all this factored in, the average cost of power washing a house is between $100 and $400 in most cases. The best way to hone in on a price is to get a few estimates before deciding which professional to hire.

A professional power washing company is the least labor-intensive way to clean your home. However, there are other options available. If you want to do the job yourself, you can rent a power washer from some home improvement stores. If you decide to rent, you can expect a daily rental fee of $40 to $75. You can also purchase your own power washer, which typically costs between $70 to $250 or more, depending on the brand, strength, size, and extra features.

Cost to pressure wash house

Pressure washing a house is similar to power washing. However, pressure washing involves using water mixed with specialized cleaning solutions to remove dirt and debris from outside surfaces such as fences, decks, driveways, and siding. A special machine produces a steady stream of water at an ultra-high pressure that gets to stubborn dirt and debris. The best pressure washing method is to move in a downward motion and maintain a steady distance to prevent damage. Most professionals perform the task from the ground and don’t require ladders to complete the job. When working on siding, the water should flow in the same direction as the siding panels. For example, the wash should occur in a horizontal pattern for lap siding and up and down for batten and board siding.

The overall cost of pressure washing a house is similar to power washing. Still, it may vary slightly based on the cleaning solution used and the specialized labor required to ensure your exterior isn’t damaged. When comparing estimates, ask about the differences in pressure and power washing within each company and ask for recommendations on the best process for your home.

How to power wash a house

Several steps are involved to effectively power wash a house:

  • Keep plants and landscaping safe by covering them with a drop cloth or plastic tarp.
  • Use a garden sprayer to apply detergent to your home’s exterior, following the manufacturer’s directions.
  • Connect and set up the pressure washer, setting it to the appropriate PSI level for the surface you’re cleaning.
  • For stubborn or extensive dirt, use a soft brush to scrub the siding, deck, fence, or driveway before washing.
  • Wearing safety goggles, work in sections, applying pressurized water to the surface in set increments.
  • Always start at the topmost point, working down with the sprayer at a 45-degree angle, sweeping the washer across the surface.
  • Repeat these steps until everything is clean and the debris and detergent are removed. 
  • Wait two days to allow to dry before sanding, painting, or staining wood surfaces.

Power washing vs pressure washing

While the terms power washing and pressure washing are often used interchangeably, there are a few differences between these methods. Power washing uses heated water, while pressure washing does not. The hot water can be effective for tough grime like salt, grease, mold, or mildew. Similar to washing dishes in hot water, heat helps remove debris. A power washer is a more robust machine because it requires more power to heat the water. Consider power washing your home if you have a lot of build-up or stubborn residue or you’re cleaning concrete, which can require more power, unlike siding or wood.

If your home’s exterior is shake or shingle-style siding, pressure washing provides the extra care required for the job. Ideally, a 125 PSI compressor with a jet washing tool will clean without disturbing the paint or wood. Professionals use a fan spray of water using a top-down motion, making several passes to clean everything and remove the remaining residue. Local contractors who specialize in cleaning home exteriors will be able to help you determine which process is best for your home.

Pressure washing estimate calculator

As with power washing, the cost of pressure washing a house may vary depending on the size of the job, current labor rates, and seasonal demand. Compare and contrast the costs of pressure and power washing when researching estimates. The average cost to pressure wash a house is between $175 to $200, while power washing runs around $175 to $400.

Pressure wash house cost per hour

While some jobs are billed as overall square footage with labor factored in, some professionals charge by the hour to perform pressure washing. The average cost is about $50 to $160 per hour to power or pressure wash, which typically evens out to about $.040 per square foot. However, the price can vary depending on the size and complexity of a job. Expect to pay more if you want your deck, fence, or driveway cleaned along with your home. The cost of pressure washing a house can also increase if your home is particularly dirty, covered in stuck-on grime, or has a delicate exterior that requires extra skill.

Pressure wash house cost per square foot

Because hot water is used during power washing, the cost is usually a bit more per square foot. Most regions have an average of between $0.35 and $0.77 per square foot. The average cost for pressure washing a house per square foot is approximately $0.08 to $0.20. If dirt is minimal, you could save a decent amount by having your home pressure-washed instead of power-washed.

Frequently asked questions (FAQs)

Last updated
We've got a handyman for you
Confirm the scope of work to get your project quoted, scheduled, and done.

Find out how much your project will cost

Popular Calculators
Projects recently requested around 43215
Every day, homeowners request projects like these on Porch
Pressure Washing Project in Columbus 43215