Arts Wired Electronics

Home Automation Company - Chicago, IL

Average rating

info

4.80

4.8

based on 178 online reviews

Average rating

info

4.80

4.8

based on 178 online reviews
based on 178 ratings

Project Gallery

A table showing the projects done by the pro

Photo

Project

Date

Description

Cost

Home

Home Security Camera Installation

Jan 2015

Add an 8 Channel DVR using High Definition 5- 2 mega pixel cameras and 3- 700TVL cameras. We had to run conduit around the home to protect lines from being cut and we had to extend a video line so that a monitor could be added to a different level than the DVR.

$4k

Chicago, IL

Movetasic led lighting installation for box truck fleet

Dec 2014

10 box trucks were in need of interior lighting in the cargo area. The lighting was connected to countdown timers, to keep from accidentally draining the battery if the employees forgot to switch them off. We purchased commercial grade countdown timers and used 1/2" conduit to hide and keep safe all wiring. 16' strips of white led lighting was ran along the tops of the inside walls. We can finish a job like this within 2-3 days.

$4k

Chicago, IL

Bionic Auto Parts Parts Truck Back Up Camera

Oct 2014

7 delivery trucks needed back up cameras and monitors to see behind them when they had to reverse. The cameras had to be mounted so they would not get damaged by the fork lifts that loaded the trucks. The new wiring was ran and zip tied tightly to existing wiring from rear camera to the front monitor.

$4k

Chicago, IL

Glenview Home

Sep 2014

Add Wireless security cameras outdoor to view front and rear entrances and indoor cameras to view both floors. We needed to run an additional outlet in the home to give electricity to one of the indoor cameras.

$2k

Glenview, IL

Lamborghini Gallardo

Aug 2014

We had to repair a hacked up job that another installer did to this Lamborghini. The aftermarket amplifiers would not turn off causing the battery to drain. We ran a new accessory wire to turn amplifiers on and off with the ignition switch. We had to remove an after market backup camera that was not working with the stereo correctly. We also removed the after market backup camera that would not work with the radio the first installer put in. We found the first installer wired in the wrong type of audio signal converter and really screwed things up, the client had to purchase a new Lamborghini radio and back up camera and the correct signal processor to get the audio sounding right. Unfortunately because of the mistakes made by the first installer the client ended up paying $7000 between Lamborghini techs and final installation cost to get the audio and video working correctly again.

$750

Chicago, IL

45' Sea Ray Audio and Video Installation

Jul 2014

Upgrade audio and video system of 45' Sea Ray. The customer wanted 2 sets of speakers on top of the boat facing the rear and the front he also wanted volume control knobs for each set of speakers. He also had 1 subwoofer and a 6 1/2" speaker that were not playing sound. We added a digital 4 channel amp to his existing system for the speakers up top, we also had to run new RCA cables to split the signal and fix wiring that came loose from the amps causing the speakers not to work. The customer also needed a switch installed that allowed control of the audio that was playing from the marine radio to tie into the speakers from the home theater system inside. We also replaced the TV.

$5k

Chicago, IL