Top 10 Drywall Contractors in Springfield, OH
Frequently asked questions about drywall contractors
In the construction of a new building, the drywall contractor is one of the last tradespeople to work on the project since they are the people who frame and hang the drywall to create the walls and ceilings. Residential drywall contractors may be responsible for subdividing a room or repairing existing drywall in a house.
Aside from installing the drywall panels, a residential drywall contractor is responsible for the following tasks:
- Cleaning and preparing the drywall before installation
- Mixing plaster compounds
- Measuring, cutting, and positioning the panels
- Mudding over screws and joists
- Taping and mudding over seams
- Scraping away the excess compound and allowing it to dry
- Sanding away blemishes
- Applying a spray finish
- Cleaning up the dust and mess
Drywall contractors are often subcontracted through the general contractor. They are exclusively responsible for installing and preparing the drywall.
Hiring a local drywall contractor will give ensure your project will be built the correct way and come in on budget through:
- Expertise. A good drywall contractor will have years of expertise and knowledge to use the correct materials for any given job and work with maximum efficiency.
- Tools and Materials. Drywall contractors already own the correct tools and compounds for their job, so everything they might need is at their disposal.
- Time and Money. Through their years of experience, drywall repair contractors will have honed their methods and skill to a point where they can work fast and well. This expertise saves you money and ensures the job is done as quickly as possible.
- Clean up. As part of their job, drywall contractors are expected to clean up the dust and mess when they finish, allowing you to have a flawless finish after painting or wallpapering.
To contrast the benefits of hiring a professional, there are a couple of solid reasons to handle the job yourself if you have the ability:
- Labor. If you’re going the DIY route, you won’t have to pay labor costs, reducing your project budget substantially.
- Scheduling. You can do the work on your schedule, meaning that you won’t have contractors going through your home at awkward times.
- Learning. Each project teaches you something, even if you already know what to do. This is the knowledge you can add to your DIY repertoire.
Yes, it is perfectly OK to put new drywall panels over existing panels. In fact, installing drywall over old panels is cheaper than removing and replacing them, and it has the benefit of adding extra soundproofing and insulation. However, when they have mold on them, the wiring or insulation needs updating, and the drywall is falling apart, it is best to remove the old panels.
Installing an entire layer of drywall can present some challenges since you’re adding another ¼” thickness to the wall. This can cause recesses on door and window trim as well as outlets. It can also affect how items are attached to your walls and how some of your fixtures might function.
In the case of repairing damaged drywall, it’s easy enough to make minor repairs yourself. For larger repairs, it’s best to hire a professional.
Hiring residential drywall contractors will save you in the long run as:
- They already have all the necessary tools.
- They know the correct thickness of panel to use.
- They can work faster and more efficiently.
- They can produce a blemish-free finish.
Hiring a quality residential drywall contractor requires a certain amount of homework on your part.
You can take a few steps to ensure you don’t end up with poor quality:
- Decide what you want. You’ll need to hammer out your expectations and identify the problem areas in your project before engaging a contractor.
- Make a list. Ask yourself: “Are there drywall contractors near me?” Create a list of the drywall contractors in your area.
- Questions. Write down a few questions to ask the contractors on your list. These should include questions about cost, the expected length of the job, what other jobs they have done, and so on.
- Contact and Interview. Contact the contractors on your list and ask them your questions. You may need to set up a separate time to interview them.
- Get a quote. Some residential drywall contractors prefer to view the job site before they give a quote concerning cost and expected time frame.
- Check references. Always ask for references from previous customers and call those references. A good contractor will be able to provide a few.
- Look at their past work. This will allow you to get an impression of their quality.
- Make sure they are licensed and insured. A license is an assurance of quality, so look for licensed drywall contractors. No matter how good a contractor is, accidents can happen. A properly insured contractor will be able to cover any potential damage that can occur as a result of faulty materials.
By doing your due diligence first, you’ll end up with a quality drywalling job.
Hanging drywall can be a tricky process that requires a healthy amount of experience and a few specialized tools.
Here are the steps needed to hang drywall:
- Prepare the Drywall Sheets. Before placing any sheets, measure the area and mark where you’ll place them. If the sheet doesn’t extend to the ceiling, it should at least end at the center of a joist.
- Drywall the ceiling. With an assistant or a lift, make sure one end is flush with the wall while the other edges are at right angles with the frame. Secure the sheet with five evenly spaced screws.
- Cut drywall for the walls. Measure the wall width and cut the sheet to 1/4” shorter. Have your assistant prop the sheet tight against the ceiling.
- Install on the wall. Make sure the first board will end up centered on a stud. Have your assistant hold the sheet tightly against the ceiling and the adjacent wall while you fasten the sheet in place.
- Cut doors, windows, and outlets. Remove the trim around the door or window and cut a hole in the drywall with the same measurements as the window or door. Using a jab saw, cut out the shape. Secure the drywall in place using five screws on each side.
- Secure at the corners. Using a jab saw, trim the drywall in the corners after hanging the sheet. This will give it a tight fit.
- Apply lightweight drywall compound and tape. Cover the screws with compound, and evenly apply the tape at the joints. Once the tape is laid, cover it with compound and sand once it is dry. You can paint when the drywall is smoothed out.
Since drywalling can be challenging to manage, hiring a contractor is a good idea. That way, you can be assured they have the right tools, experience, and insurance in case of a mishap.
Hanging drywall properly requires a certain amount of finesse, so it stands to reason that it’s possible to do a lousy job. Discuss your expectations with your local drywall contractor to stop errors before they start. Having said that, poor workmanship can still happen, especially if the drywall is in a residence.
Here are the three most common drywall mistakes, including how to repair them:
- Rough surface. Residential drywalling should be smooth, so a rough surface indicates poor workmanship. Ridges of the compound on the drywall can be sanded, but bumpy tape will need to be pulled off and redone.
- Visible nail or screw holes. One or two holes can be repaired with a joint compound, but a larger number of holes can mean the drywall was poorly installed. In this case, you may need to remove and rehang the panel.
- Mess. Drywall contractors will usually clean up the drywall dust after sanding since the dust can interfere with paint or primer application. Repairing this mistake will require stripping and reapplying the paint.
Recent reviews for Springfield Drywall Contractors
Bill and his crew were amazing and felt like part of the family. So proffesional and really cared and took pride in every aspect.
The first service I ever felt really good about with our home. Clean professional and above and beyond our expectations
Ken & Tina are fabulous! They installed my microwave in no time at a very reasonable price! Bonus: they are 2 of the nicest people I have ever met!
Chuck at Able gave me a very good estimate, he was significantly less then the 2 other estimates I recieved. His crew painted four rooms and ceilings in my home. They did an excellent job and finished earlier then they told me they would. I couldn't be mo...
T&L Roofing & Construction has done an excellent job and exceeded my expectations on the work performance submitted by the team staff and employees it was a warm and friendly experience and I would recommend their services to anyone who is in need of hous...
You will regret enlisting this contractor. He promised we would be happy with the finished job, but actually the driveway looks worse then before he began. He had no idea what he was doing, nor did his helper who was an "expert" in the business. We paid a...
Everything You Need to Know About Springfield Drywall Contractors
I have Drywall Services work that I need done in Springfield. What should my budget be?
Our data on recent drywall contractor projects in Springfield shows that larger drywall services projects in city are often upwards of $0.00. However, this price depends on a number of factors. Cost can increase or decrease based on any/all of the following:
- Location: drywall contractors travel time may factor into the budget.
- Cost of materials. This is an important factor of your drywall services project budget. You can purchase materials yourself, but remember that your drywall contractor professional maybe be able to leverage relationships with other companies to save on material costs.
- Company ratings: Highly-rated drywall contractors tend to be more expensive. Decide what balance between ratings and cost is right for you.
As always, every project is different and you should contact multiple drywall contractors throughout Springfield to ensure your project is done right.
How does invoicing/payment work for most Drywall Contractor projects in Springfield?
Every project differs, but you should ask any drywall contractor for an estimate, before they do any work. In fact, ask for their general payment terms before any drywall services work is done.
If the job is large and going to take longer than a day, it's common practice for drywall contractors to request a down payment. Usually, this will be around 25% so they can commence work on your drywall contractor project.
If it's a quick job, you'll likely be given an invoice/bill when the job is complete. Then it's up to you and the drywall contractor to determine if you pay immediately or can send payment at a later date.
What should I check for once my Drywall Contractor in Springfield has finished working?
Every drywall services project is going to have different results, but here are a few things to check for once any drywall services company has told you they've finished the job:
- Obviously you want to do a visual inspection. Even if you're unfamiliar with drywall services work, this gives you the opportunity to ask questions (even basic ones like, what did you do?).
- Ask the drywall contractor to describe what they did. Whether your drywall services project was a repair job or a building job, have them run you through what was done.
- Compare the description provided on your drywall services project estimate to the work completed. Did the professional do what was promised?
- Request that the drywall contractor do a follow-up visit to check on the work. Most professionals are willing to do this, especially if you ask them.