Start to Finish Remodeling & Handyman Inc.

Jan 2016

Total gut. Floor joist totally rotted, exterior wall studs rotted, raised ceiling to 8' from 7'. All new electric, and plumbing lines(waste and water). Full assembly.

$21k

Huntington, NY

Jan 2016

Sheathing of flat roof completely rotted. Removed down to rafters on flat section. Sistered 8-10 existing rafters. Ripped 3 layers shingles. All new 5/8 sheathing. Removed skylight. Used GAF Liberty Base and cap sheet system for flat areas. Ice and water all other sheathing, and standard 3 tab to match previous

$8k

South Huntington, NY

Nov 2015

Whole House Painting

$30k

Huntington, NY

Nov 2015

3/4 of the porch joist had rot and sag. The deck boards had been replaced piecemeal over the years, and also had considerable rot. Clients desire to preserve as much of porch as possible while remaining prudent towards replacement. So we kept railing system for most part minus 1 big section that was custom built. All the columns were secured to headers by straps before jacking up entire roof and columns and then supported while we took everything out from under them, as deck was installed originally before columns were put in place. Replaced with new pressure treated joist and beams, new deck boards primed before installation. Lowered roof after all carpentry and trim work was done. Painted with Sherwin -Williams Duckback.

$13k

Huntington, NY

Feb 2015

Complete gut of 30' x 30' semi-finished basement with heavy water entry issue's. Full perimeter french drains, all new windows, new full bathroom with ejector pits, laundry room, small kitchen, separate entry, rec room, new stairwell to first floor. All floors new plank style tile, and much more.

$65k

Bethpage, NY

Feb 2015

Demolish existing 12' x 20' garage. Re-build from slab up creating "Little House" guest cottage w/ kitchenette, full bath, bedroom/ living room and loft bedroom.

$50k

Lutz, FL

Dec 2014

Dig 12" trench to bury galvanized wire. Frame under porch structure with pressure treated 2x4's for vinyl lattice attachment , as well as galvanized underground wire attachment to keep animals from digging under. Install vinyl lattice. Trim with PVC.

$2k

Huntington, NY

Dec 2014

Ripe roof to rafters, removing 2 layers and old 3/8" thick plywood. Install skylight, 5/8" plywood, new lifetime architectural shingles. Started at 7 am, finish pictures at 2 pm, cleaned and leaving.

$14k

Huntington, NY

Mar 2014

Client complained of huge amounts of moisture and condensation in attic, with mold starting to grow. After inspecting the recent Blown in Cellulose throughout, it was clear that there was an installation failure! But what element. Recent siding installed by others, recent roof project by others, and the new cellulose. New vinyl non-vented soffit material was installed possibly stopping airflow up. The roofers had installed cobra rolled roof vent as well, but it appeared completely squashed- We decided to start with least expensive possibility and that was no air getting out through cobra vent. A quick match blow out and it was clear nothing was escaping. So we tore off caps and installed the ridged roof vents from Certainteed, and re-capped. Problem solved. The moisture dried up and mold ceased. The sciences of insulation are complicated. Whether closed spray foam, open cell, cellulose or fiberglass insulation extreme caution should be exercised before having just anyone install it. Air flow and how and where it flows, or is trapped are critical thoughts....air carries moisture.

$650

Commack, NY