R & D Heating, Cooling & Electric

HVAC Company - Kennett Square, PA

Project Gallery

A table showing the projects done by the pro

Photo

Project

Date

Description

Cost

Home

Avondale PA Generator Installation

Oct 2015

Installation of a Generac 16kw whole home generator. This installation required a terraced platform for the generator which was achieved by boxing out the area with pressure treated 6x6 material to 12" in height and then back-filling with crushed gravel. We used a 200 amp automatic transfer switch with multiple power management modules to properly shed load the clients appliances.

$8k

Haddam, CT

Hockessin DE Furnace & Air Conditioner Replacement

Oct 2015

This project entailed the replacement of two heating and air conditioning systems along with re-installing two whole home humidifiers. We installed all new sheet metal to include a drain pan and emergency shut off. Condensate pumps were also installed with vinyl tubing run to the exterior of the home. We also installed wireless touch screen thermostats with remote monitoring capability.

$13k

University Place, WA

Bryn Mawr PA Generac Generator Installation

Oct 2015

Installation of a Generac Guardian 22kw natural gas whole home generator with two (2) 200 amp automatic transfer switches. With this installation we had 60 foot runs for both gas an electric with an additional 60 feet of run to connect a second electrical panel across the entire basement. Due to township code the generator needed 5 feet of clearance from the house, we utilized slim duct to hide the exterior lines and landscaped the entire area in which the generator was installed. All Generators set by R&D come standard with a 3" Genpad to add more stability and cleaner aesthetics.

$10k

Bryn Mawr, PA

Kennett Square Generator Installation

Sep 2015

Installation of a Generac 22kw whole home generator with a 200 amp smart switch.

$10k

Flushing, MI

West Chester PA 16kw Generator Installation

Aug 2015

This generator project consisted of over a 100ft run from the transfer switch to the generator. The client also had a solar panel system that needed to be tied into the main electrical panel.

$9k

West Chester, PA

Kennett Square PA Heat Pump Installation

Jul 2015

This project was for a rental property in which the heat pump failed and needed to replaced.

$6k

Gig Harbor, WA

Kennett Square PA Heat Pump Installation

Jul 2015

This project was for a rental property in which the heat pump failed and needed to replaced.

$6k

Tacoma, WA

Springfield PA Heating & AC Installation

Nov 2015

This project entailed the installation of a new Bryant 3 ton gas furnace and air conditioning system. Though the clients unit was still working it was past its prime and they wanted to be proactive. R&D installed the outdoor condenser on a new pad with a crushed stone based. New refrigerant lines were run as we switched from R-22 refrigerant to Puron. All new sheet metal was made from our custom sheet metal shop and the unit was installed with a new return air package, custom plenum, drain pan with emergency shut off switch and condensate pump.

$7k

Springfield, PA

Downingtown PA Furnace and Air Conditioner Replacement

Nov 2015

This project consisted of a new Bryant gas furnace and air conditioner installation in addition to a Aprilaire whole home humidifier system. The unit was installed with all new sheet metal ducting, drain pan, emergency wet switch, and condensate pump.

$8k

Downingtown, PA