Insulation Contractor - Kirkland, WA
Average rating
4.86
4.9
Average rating
Specialty Insulation NW derived from a company founded in 1969. In 2009, we recognized a pattern in the marketplace of unreliable work. We came to the understanding that customers in the Seattle area were demanding a front-runner for customer service and quality work that they could rely on. Energized by the realization, we began to reinvent ourselves to embrace a unique brand that the Seattle area could recognize for reliable insulation. We’re proud of our achievements so far and the impact that we’ve made for our customers. Both residential and commercial customers trust us to insulate their buildings, homes and facilities. Whether new or old, fresh installation or retrofitting, we’re available and happy to make sure the job is done right the first time. And with quality customer service as our priority, even some of the most high-profile residents in our area trust us to execute well and respect their privacy.
Average rating
Katy d.
This company had glowing reviews on yelp and other professional websites, however, the service and actual work product we experienced was less than desirable. The owner was very responsive though and clearly cares about his customers, however, it doesn't change the fact that his crew consistently showed up hours late, dripped bleach solution all over the uncovered corners of the room with attic access (therefore requiring us to spend time cleaning the bleach from our items and the room), did not replace moved around items, and trampled plants outside the window to the room. The company also scheduled to have a huge load of insulation delivered to our house (not for our project) so they could pick it up later which would have been fine except the insulation sat in our yard for hours (since the crew was hours late) and the truck they had delivering the insulation ripped off a wire from our house and we're now responsible for ensuring the repairs are completed (that would not have happened but for them delivering the insulation that wasn't ours). They also charged us the second half of the payment immediately after the 1st day of work despite not finishing the job, verifying with us that work was completed at promised (it was not), not verifying with us that it was ok to charge our credit card (we were never informed they would be keeping our card on file), and included items in the bill which would never be completed. In the end, the owner addressed our concerns and removed the incomplete items from our bill. Given the weeks of headaches (and ongoing since we now have to deal with siding repair), we would NOT recommend this company.
Professional and attentive. The road was iced over but they still made it happen! Impressed.
Address
11335 NE 122nd Way Ste 105
Kirkland, WA 98034
Photo | Project | Date | Description | Cost | Home |
---|---|---|---|---|---|
Insulation Contracting in Bellevue | Dec 2014 | Replace estimated 30 baffles for ventilation., Install blown in cellulose insulation to a R-49 and rulers to show depth., Install 6 mil black vapor barrier and pin down with U shaped metal rods. Twine insulation into p..., Install metal screws, Fiber Seal Mastic and wrap with R-11 batted insulation., Attic & Duct Sealing. | $2k | Bellevue, WA | |
Insulation Contracting in Seattle | Nov 2014 | Remove estimated 1,560 sq ft of rodent contaminated insulation, 4" or less, debris and sanitize ..., Install 1/4" galvanized screen, metal flashing and concrete to seal all rodent entry points in a..., Install rulers to show insulation depth and install estimated 100 baffles for ventilation. (Atti..., Install estimated 1,560 sq ft of Knauf Jet Stream Ultra fiberglass insulation to a R-49, 17" depth., Install 2 1/2 sheets of plywood with 2 x 6 attached to bottom to make a storage area for custome..., **Need account number to verify eligibility.** | $4k | Seattle, WA | |
Insulation Contracting in Kirkland | Nov 2014 | Remove insulation, vapor barrier, debris, rodent nests, rodent feces, sanitize and deodorize wit..., Install 6 mil black vapor barrier and pin down with U shaped metal rods., Strap up heat ducts. Dig out dirt out of part of duct that is smashed., Microsoft, Install blown in cellulose insulation to a R-49., Install R30, 16" batted insulation and twine into place. Install weather stripping on access lid... | $3k | Kirkland, WA | |
Insulation Contracting in Seattle | Nov 2014 | Install estimated 780 sq ft of R-30 Ecco Batt insulation and twine into place. Install wax baffl..., Check flex ducts for holes. | $1k | Seattle, WA | |
Insulation Contracting in Sammamish | Nov 2014 | Install 510 sq ft of R-21, 16" on center. Install 210 sq ft of R-15 HD., Install 728 sq ft of R-38, 24" on center batted insulation. | $2k | Sammamish, WA | |
Insulation Contracting in Woodinville | Nov 2014 | Remove insulation, vapor barrier, rodent nests, rodent feces, sweep ledges and pier pads, saniti..., Install 6 mil black vapor barrier and pin down with U shaped metal rods., Install 1/4" galvanized screen, metal flashing and concrete to seal all rodent entry points., Install R-21, 16" batted insulation and twine into place. Install new access door., Remove duct insulation, install metal screws, Fiber Seal Mastic and wrap with R-11 batted insula... | $2k | Woodinville, WA | |
Insulation Contracting in Seattle | Nov 2014 | Remove blown in and batted insulation, debris, rodent nests, rodent feces, sanitize and deodoriz..., Seal all gutter fascia gaps with metal flashing, 1/4" galvanized screen and concrete to seal all..., Install estimated 80 baffles for ventilation., Install blown in cellulose insulation to a R-49 and rulers to show depth. | $3k | Seattle, WA | |
Insulation Contracting in Sammamish | Nov 2014 | Install hard rigid duct and 4" black roof jack and wrap with R-11 batted insulation., Install hard rigid duct and 6" black roof vent, wrap with R-11 batted insulation., Microsoft | $333 | Sammamish, WA | |
Insulation Contracting in Redmond | Nov 2014 | Remove insulation, debris, vapor barrier, rodent nests, rodent feces, sweep ledges and pier pads..., Install 6 mil black vapor barrier and pin down with U shaped metal rods., Install R-25, 12" batted insulation and twine into place. Install R-38, 16" batted insulation an... | $2k | Redmond, WA |