Jovia Renovations

Sep 2019

This project had its challenges, the customer was wanting the LVP (luxury vinyl plank) flooring throughout the couch. We ran into an issue with the slide-out guides which had screw heads protruding that were catching on the flooring, good thing I did some testing prior to full-on installation. We ended up having to install carpet back in those areas but were able to install the LVP in critical areas like the entry, kitchen, hall, and bedroom.

$2k

La Center, WA

Aug 2019

This homeowner wanted to have this shower to be a place where he could sit for a couple of minutes just to soak after a long day. The fiberglass shower had been removed along with the old drywall so we could start with a clean slate. This shower system is a lite weight system and can be ready to tile in one day, versus the concrete pan that takes a few days before tiling can begin. We had also installed vinyl flooring in this bath along with another bath and utility room, laminate plank flooring was also installed in the hall, living, dining, and kitchen areas, but the shower was the main focal point.

$4k

Ridgefield, WA

Mar 2015

This house had too much wood work for the home owners along with too much brass/gold. We removed all the wood base and went with a taller base that suited the interior much nicer than the old plain base. The door trim we painted to match the doors and base. The window trim we painted the same color as the walls except with a different sheen. All the flat plain doors we replaced with a nicer 6 panel, the mirrored with gold trim closet doors were replaced with a 6 panel as well. The den doors were replaced with 10 light french doors which added a very nice touch to that room. The cabinets were sanded and cleaned up and painted which really helped to brighten up the interior. New cabinets in the baths. The master bath had a lot of wasted space in it, on both sides of the walk in tub were pretty much useless, so by removing the tub and extending the platform, cutting it out to accommodate a standard tub, really opened up the bath room allowing for a makeup counter.

$33k

Vancouver, WA

Feb 2015

We were asked to build a mantel around the fireplace and to incorporate the alcove for electronics.We were able to build a shelf unit inside the alcove and finish that off with smoked glass doors.

$1k

Vancouver, WA

Oct 2014

The homeowner had purchased this home four years ago which had been newly remodeled. The columns at the front porch were rotten from water due to poor workmanship. The columns were sitting directly on the brick with little to no caulking and the rest of the columns had very little caulking at the seams and joints. We replaced a total of four columns and when we dismantled the old ones, we found that two columns were false and the other two were built around two steel post.

$800

Vancouver, WA

Sep 2014

We were asked to come in and refinish this deck, but found that it had three coats of paint, and many of the boards were rotting. We decided that replacing the deck boards would be a less expensive solution and would be a nicer finished project for the homeowners.

La Center, WA

Jul 2014

This deck was worn and the old cheap brush on stain was pealing and in pretty bad shape. We used a stripper to remove the old stain, then we sanded the decking and bench to smooth out the surfaces, and finally a nice coating of a quality stain that soaks into the wood and will last much longer and looks much better. The fence never had a stain on it, so it was weathering and starting to rot in a few places because it gets very little sun to help dry it out. We power washed first, and then stained it to help extend it's life for several more years. The photo of the fence shows the grey weathering before we started, the raw wood after power washing, and finally after applying the stain.

Oregon City, OR

May 2014

Design and installation of wall tile. Another contractor started this project and really messed up the wall tile by cutting tiles crooked and not having any real edging along the edges. The home owner originally wanted us to repair what was there, but after our suggestion to rebuild it with a nicer design, they agreed to our suggestion. The final project has a nice finish at the edges, the feature tiles are set in a nice framework that helps to set off a nice transition between the field and feature tiles. We then installed the owners Hood fan and stove.

Portland, OR

Apr 2014

The homeowner had their kitchen remodeled a couple of years prior to this project and there was never any sort of fan installed for the stove, be it down or up draft. They wanted a ventless hood microwave installed above their stove with no idea how to do it with out cabinets above the stove. We were able to come up with this sturdy shelving which also gave them a bit more storage in the kitchen.

Vancouver, WA