Rockbridge Flooring Professionals, LLC

Apr 2015

Our client has a contemporary floor-to-ceiling glass foyer with a spiral staircase as its centerpiece. They chose to overlay their existing marble with a high-shine, beautiful new gray marble. Perfectly cut into 12- x 24-inch pieces, the tiles went down in a galveston pattern. Prior to installation, the existing marble was acid etched to remove the polish layer. Otherwise, the new tiles would not adhere to the old. In the photos above, the acid etch has already occurred, resulting in a matte-look finish on the dark marble. Precise cuts were made to match the rounded, existing marble tiles around the staircase. A stainless steel stairnose manufactured by Schluter was used. Its visible in the last photo.

Richmond, VA

Mar 2015

When you think of cork, you probably think about bulletin boards or wine corks, but have you considered cork flooring? Recently we had the pleasure of installing 530 square feet of prefinished locking cork hardwood flooring. Each plank was roughly 12x3 for a simple tongue-and-groove interlock.

Richmond, VA

Feb 2015

Our gracious clients wanted a flooring upgrade in their bathrooms but they didnt expect what we found in one of them. Who ever does? A leaky toilet meant a rotten sub floor, which equaled brand new sub floor. Running into issues like this adds time to the job and increases the cost. Flooring Process: -Reframed and patched around the rotted flange with 1/2 plywood -5/8 plywood sub floor overlay -Schluter DITRA installed with modified thin set -12 x 12 porcelain Del Conca Roman Stone Beige installed with unmodified thin set -Used Mapei Keracolor S sanded grout in biscuit to complete the installation

Midlothian, VA