On The Level Carpentry General Building Contractor

Deck Contractor - Richardson, TX

Project Gallery

A table showing the projects done by the pro

Photo

Project

Date

Description

Cost

Home

Johnson

May 2014

Mrs. Johnson requested I make her son a day bed for his room. It was a job that I did at my shop with Pine and plywood.

$900

Richardson, TX

McGarity

Feb 2022

Residential Carpentry. I installed a 1 3/4" thick Walnut countertop with supporting side Waterfalls. I sanded the surfaces down to 320 grit tolerance and then put one coat of Odie's Oil and two coats of Odie's Wax. I highly recommend the oil and the wax. .

Richardson, TX

Platonski

Dec 2021

The client asked me to remove and replace the existing window with a new crank out window. He then asked me to install a new hydro tub with a main frame and step. He had already hired a tile pro to install tile, so I left the job looking just like you see in the picture.

Richardson, TX

Lancaster

Dec 2021

This was a full remodel of two rooms.

Richardson, TX

Sutton

Dec 2021

Window Installation with exterior siding and trim work, ready for the painter.

Richardson, TX

Dalingers

Dec 2021

Bathroom remodel. We replaced the counter top and installed new sink hardware and a lavatory that set on top of the granite counter top. We also built a custom made cabinet set for that space. We painted on site what needed to be painted. materials were all Pine and shop grade plywood. We tiled the backsplash as well

Richardson, TX

Tyler Boss

Dec 2021

This was a big pair of bathroom remodels that turned out really well. We did a complete new shower as well as tile floors granite counter tops new plumbing fixtures sinks, toilets. There was nothing on these two bathrooms that we did remove and replace.

Richardson, TX

Dalbridge

Dec 2021

New staircase, hand railing and wire enclosure. All wood is Pine.

Richardson, TX

Cohen

Apr 2021

My client asked me to remove and replace the gate and fence with a new one. We did a 1"x6" board on board fence and gate. We used the the Shark Brand hinge system, which guarantees no drop in the gate for a the life time of that gate, and then some. With one primer coat and two coats of house matching paint we loved the way it turned out. We built a 20' Octagon shaped Cedar deck , a smaller 8'x10' Cedar Deck and a landing deck into the back door of the home along with a full hand railing system also made out of Cedar. We built a Labyrinth from the original one that was in place and put Cedar boards, shaped in an Octagon surrounding the Labyrinth to match the big deck's design..

Richardson, TX