Cole Heating & Cooling Inc

HVAC Contractor - Seymour, CT

Average rating

info

4.41

4.4

based on 296 online reviews

Average rating

info

4.41

4.4

based on 296 online reviews
based on 296 ratings

Project Gallery

A table showing the projects done by the pro

Photo

Project

Date

Description

Cost

Home

Oxford Boiler Replacement

Jan 2013

Technicians cut out the old boiler, and replaced it with a new, more efficient one. They put the new boiler up on cement blocks 18 inches off the ground, in accordance with the fire code. After the new boiler was in place, technicians replaced the piping the system.

$8k

Oxford, CT

Naugatuck AC Repair

May 2015

Technician tested the AC system and found that the dual capacitor was blown. Replaced it with two separate capacitors for better efficiency, then started system and performed a final test to ensure everything was running properly.

$170

Naugatuck, CT

Southbury AC Maintenance

Apr 2015

Changed air filter. Checked wires and connections in air handler. Flushed condenser pan and drain line. Cleaned evaporator coil. Washed and cleaned condenser coil. Checked wires and connections in outdoor unit.

$157

Southbury, CT

Bethany Heat Repair

Apr 2015

Customer called explaining that the blower was not functioning. After a full inspection and testing, technician found the freeze protection control stuck in reset mode, preventing the blower from running.

$113

Bethany, CT

Oxford Thermostat Replacement

Mar 2015

Changed out thermostat after determining it was malfunctioning. Checked to make sure zone dampers worked correctly with new thermostat. Everything functioning correctly. The thermostat was covered under warranty, but labor was not.

$111

Oxford, CT

Bethany Boiler Leak Repair

Feb 2015

After rigorous testing, technician discovered the source of water and oil leak: the circulator. Technician replaced circulator bearing assembly, and the pump coupling, which completely stopped the leak. The bearing assembly was the most expensive part of the call.

$442

Bethany, CT

Beacon Falls Heat Repair

Jan 2015

Found bad connection at pressure switch, resulting in loss of 24 volts to the ignition relay. Checked the sequence of operations on the boiler after fixing electrical issues. The system is now functioning normally.

$118

Ansonia, CT

Seymour Thermostat Replacement

Jan 2015

Replaced old heat pump thermostat with a new one. Re-wired the new thermostat and thoroughly tested the system with new equipment.

$249

Seymour, CT

Oxford Boiler Replacement

Nov 2013

-Drained, disconnected, removed, and disposed of existing boiler. -Delivered and installed a Burnham V8 Boiler, with new oil burner. -Adapted new boiler to existing piping. -Installed miscellaneous valves and electrical equipment. -Replaced old smoke pipe with new one. -Installed new oil line, from the oil tank to the boiler. -1 year warranty on parts and labor from Cole.

$7k

Oxford, CT