When your bathroom floor starts to look worse for wear, it may be time to install new bathroom tiles. A lot of factors affect bathroom floor tile installation cost. Hiring a professional or doing it yourself, the professional’s experience level, the tiles you want, the size and layout of your bathroom, the current state of the bathroom floor, and where you live will all affect the cost.
Experienced contractors are more in-demand, so they might give a higher estimate of the cost to install bathroom tile. Shop around for a few different estimates and choose the best one based on their qualifications and reputation. Your location matters because you may need a permit based on where you live. It’ll also cost more if your current bathroom tiles need to be removed, if there’s any damage to the floor, or if you want to get rectified tiles, which get cut after firing to make a more exact fit.
In this article, you’ll learn about all the factors and costs involved in bathroom tile installation, including DIY versus hiring a professional, material costs, and recommendations. It’ll also address questions surrounding unexpected costs, the differences in prices and look in tile, and how to get the best final results.
|What you can expect|
|Range per square foot:||$11.58||$17.92|
|Range for this type of project:||$3,473||$5,377|
Bathroom Floor Tile Cost
Cost of residential-grade, glazed ceramic in 12"x12" tiles, durable enough for moderate to heavy traffic. Rate is inclusive of local delivery, as well as standard excess for perfect installation and occasional repairs.
Bathroom Floor Tile Labor, Basic
Labor cost, under typical conditions, for complete installation. Backer board will be measured, assembled, and secured, then tile pattern will be appropriately laid out and installed with thinset mortar. Seams will be grouted, and full surface cleaned. Fee is inclusive of all aspects of the project, such as thorough planning, acquisition of equipment and material, preparation and protection of project site, and meticulous cleanup.
Bathroom Floor Tile Job Supplies
Requisite supplies for the job, including fabrication and polishing disposables, manufacturer-recommended underlayment, fasteners, adhesives, and surface sealants.
Bathroom Floor Tile Equipment Allowance
Daily rental of specialty equipment for maximum quality and efficiency. These include 10" diamond wet tile and stone saw, mortar box, and power mortar mixer. Consumable equipment elements not included.
Bathroom Floor Tile Debris Disposal
Responsible disposal of all related project debris, including the cost to load and haul old materials, installation waste, and any other refuse.
Option: Remove Tile
Tile will be detached from adjacent surfaces, broken into portable segments, and removed from premises.
|cost to install bathroom floor tile|
|National Avg. Materials Cost per square foot||$1.63|
|National Avg. Cost (labor and materials) for 300 square foot||$4,354.19|
|National Cost Range (labor and materials) for 300 square foot||$3,417.39 - $5,290.99|
When assessing the cost to install tile in your bathroom, a few factors will affect the overall cost:
The cost to install tile floor in the bathroom will likely include an underlying base layer. Your contractor may have a preference, but generally, you can choose from the following materials:
The material cost to lay any type of tile is between $3 and $10 per square foot. The most common types of bathroom tile are porcelain and ceramic, both clay-based materials that have been shaped, molded, and glazed.
With materials and labor, it costs between $7 and $14 to install ceramic tile and $12 to $19 to install porcelain. Porcelain is more expensive than ceramic because it can resist stains and handle moisture better as a heavy and dense material. Both porcelain and ceramic tiles are cooked in a kiln, and each maintains its color, is moisture- and stain-resistant, and will last a very long time. Porcelain is longer-lasting and generally tougher than ceramic.
Hiring a professional tile installer will ensure the job gets done right the first time. Sometimes a contractor will charge by the hour to do your bathroom floor. It’s more common for them to charge per square foot, along with other factors like the layout of your bathroom, any removal work that needs to be done, and the type of underlay you choose. It ranges from $25 to $100 per hour if they charge by the hour. Urban areas will have higher rates than smaller towns. A contractor may also charge a flat rate.
You’ll pay, on average, $4 to $8 per square foot for the adhesive and $7 to $14 per square foot for the underlay. Laying the tiles costs $4 to $8 for lower-range materials such as ceramic and $12 to $14 per square foot for higher-end products like marble, natural stone, or granite. Generally, you can expect to pay between $5 and $10 per square foot.
Usually, larger tiles are less expensive than small tiles because they’re less labor-intensive to size, cut, and fit. Large tiles cost $5 to $15 per square foot to lay, while smaller ones can be double that. When selecting what tiles are right for your bathroom, you have a wide variety to choose from. Bathroom tiles are available in materials including ceramic, porcelain, and cut stone, and they can be durable and non-slip.
This is usually the most cost-effective option. It’s water-resistant and fairly durable, although it will chip if it becomes brittle or suffers impact. It costs between $1 and $7 per square foot.
Formed at a higher temperature than ceramic, porcelain tiles are harder and more resistant. It costs between $3 to $10 per square foot, with an extra $1 or $2 added for a slip-resistant tile.
This is a great way to give your bathroom floor the appearance of wood with the durability of tile. It costs $3 to $12 per square foot for this style of tile. It comes in wood-like looks such as walnut, oak, chestnut, and ash wood.
This material is popular because it comes in various colors and patterns and is affordable. It also has a durable walking surface, making it a long-lasting option. They cost $0.41 to $5 per square foot.
Generally, it costs $5 to $20 per square foot for stone flooring, but if natural stone flooring needs to be cut, the cost goes up to $50. There are many types of stone to choose from, including limestone, clay, granite, sandstone, slate, and basalt.
This classic, elegant tile costs between $10 to $20 per square foot and is often available as pre-cut tiles, which helps to lower the cost slightly.
Resilient tile includes linoleum, cork, and rubber. It’s defined by its durable yet elastic nature and is great for families with children or bathroom floors that get a lot of traction. This type of flooring costs from $1 to $7 per square foot.
To save on costs, sometimes people like to tackle these home projects DIY. If you have a bit of experience and a weekend to spare, you’ll likely be able to retile your bathroom yourself.
If you are going to DIY, ensure you have all the tools and materials you need to complete the project successfully. If you have to rent tools, it would be worth checking estimates to have your floor professionally done, as the cost will be comparable. You’ll need tile spacers, grout and grout sealer to protect the tiles from mold and moisture, thin-set mortar, silicone caulking for around the toilet and bathtub, and proper tile cutters to fit the tiling properly to the shape of the floor.
These costs all add up, and if you’re not sure of the process, you may make mistakes that a professional will have to remedy later. If many small cuts need to be made, leaving the job to a pro may be smart, as these intricate details will only look good if done correctly. An amateur job could result in raised, cracked, or loose tiles or an incomplete finish in the corners. This not only looks haphazard but could result in water damage below.
A professional will be sure to avoid these problems while doing a more efficient job without wasting tiles from poor cuts.
What’s the cost to install a tile floor in the bathroom?
What does it cost to remove and retile a floor?
What’s the cost of ceramic tile installation per square foot?
What does it cost to tile a very large bathroom?
Why do tilers often charge per square foot rather than the hour?